Friday, March 15, 2013

Jergens 27170 Metric Shortie Spring Plunger, Low Carbon Steel, M4 x 0.7 Thread

Jergens 27170
Jergens 27170 Metric Shortie Spring Plunger, Low Carbon Steel, M4 x 0.7 Thread
by Jergens

New!: $12.64 (as of 03/15/2013 20:55 PST)

Ball Nose

Jergens Shortie Spring Plungers are made to the same quality standards as the Solid Drive plungers. Carbon Steel body is made with full standard spring plunger stroke in the short body. Also, a screwdriver slot is substituted for the hex drive due to the smaller size.

  • Rank: #79387 in BISS
  • Brand: Jergens
  • Number of items: 1
  • Steel tip
  • Black-oxide finish provides lubricity and mild rust resistance
  • Thread: 6g

1/4-20 x .531, End force - 7 lbs., Inch, Stain. Steel Ball, Stain. Steel Body, Standard, Ball Plunger (1 Each)

1420 x
1/4-us.html x .531, End force - 7 lbs., Inch, Stain. Steel Ball, Stain. Steel Body, Standard, Ball Plunger (1 Each)
by Vlier

New!: $3.35 (as of 03/15/2013 20:55 PST)

Ball Nose

Ball - Spring Loaded Devices - Pins & Plungers Type: Threaded w/o Locking Element Thread Size: 1/4-us.html Ball Diameter: 0.1250 In. Maximum Ball Reach: 0.035 In. Length: 0.531 In.

  • Rank: #73088 in BISS
  • Size: 1/4"-us.html
  • Brand: Vlier
  • Dimensions: .1 pounds

Jergens 30521 Steel Spring Plunger With Delrin Tip, Low Carbon Steel, 6-32" Thread, With Locking Element

Jergens 30521
Jergens 30521 Steel Spring Plunger With Delrin Tip, Low Carbon Steel, 6-32" Thread, With Locking Element
by Jergens

New!: $9.10 (as of 03/15/2013 20:55 PST)

Ball Nose

Unlike conventional spring plungers, the Jergens Solid Drive Plunger is one integral piece of steel: hex drive, plunger, and body. No set screw to separate from plunger body, no lost springs to retrieve, no need for “easy-out” tools. Best of all, when adjusting Solid Drive, you can be sure the spring plunger is turning and not just a set screw.

  • Rank: #309361 in BISS
  • Brand: Jergens
  • Number of items: 1
  • Thread: 2A-UNC
  • Steel tips are a hardened steel
  • Single unit construction
  • No set screw to separate from plunger body
  • Close tolerance between tip and body